Bathtub Refinishing & Reglazing in Norco
Horsetown USA is built on half-acre lots and single-story ranch homes, and a lot of those homes still have the bathrooms they were built with in the 1960s and 70s. We refinish them in place — no demolition, no plumbing, one day. Call it reglazing, refinishing or resurfacing; either way you get a new, glossy surface bonded to your existing tub, sink or tile in a single visit.
4.9 / 5.0 Rating
From 500+ reviews
Norco’s trusted reglazing specialists
Our Norco customers tend to own their homes for decades, which is exactly when a tub, shower or vanity earns a second life through refinishing instead of a tear-out.
Every job comes with a written warranty and is usually finished the same day it starts. Request a free estimate and see what your Norco bathroom can look like.
Reglazing services in Norco
One visit, one technician: the worn surfaces in a Norco bathroom or kitchen made new again without a remodel.
Bathtub Reglazing
Chipped, stained or dated tubs restored to a glossy, like-new finish.
Learn more
Sink Reglazing
Bathroom & kitchen sinks refinished in a single visit — no re-plumbing.
Learn more
Shower Reglazing
Fiberglass & tile showers made bright, watertight and like new.
Learn more
Tile & Wall Reglazing
Colored 1950s–80s tile coated white, grout lines sealed, nothing torn out.
Learn more
Countertop Reglazing
Laminate & cultured-marble counters given a durable stone-look finish.
Learn more
Color Changes
Almond, pink or avocado fixtures changed to a crisp modern white.
Learn moreNorco before & after transformations
Before-and-after photos from recent Simply Reglaze jobs — tap any image to see it full size.
Built for Norco’s bathrooms
Norco is unusual for the Inland Empire: animal-keeping lots, no sidewalks, and a housing stock that is mostly 1960s–1980s single-story ranch homes on large parcels. Those houses were built with porcelain-on-steel or cast-iron tubs, ceramic tile surrounds — often in the harvest gold, avocado or almond of the day — and cultured-marble vanity tops that have now seen forty or fifty years of hard water.
Norco Hills and a few newer pockets add 1990s–2000s homes with fiberglass tub-shower units, but the common thread is the same: the fixtures are structurally sound and only the surface is worn. Refinishing fills the chips and rust, sands everything smooth and applies a new glossy coating — and a dated color can be changed to white in the same visit. On a rural lot with a septic system and older plumbing, avoiding a tub replacement is a real advantage.
That is the case for refinishing in Norco: the tub, shower, sink and tile stay where they are, the plumbing is never touched, and the whole bathroom is usable again the next morning.
75%
less than replacing your fixtures
1 Day
in and out — no demolition
5–10 yrs
finish life with proper care
1964
Est. — homes of
every era, made new
Bathtub reglazing cost in Norco
A standard bathtub refinish in Norco starts at $350 and most run to about $500 depending on size, damage and color. For sinks, showers, tile and counters, text us a photo for a fast, exact quote.
| Reglazing | Replacing | |
|---|---|---|
| Typical cost | $350–$500 | $5,100–$9,900 |
| Time | About a day | 1–3 weeks |
| Demolition & plumbing | None | Required |
| Your original fixture | Preserved | Sent to landfill |
The replacement column assumes a new tub plus demolition, plumbing, tile repair and haul-away in a typical Norco home.
What homeowners say about Simply Reglaze
Five-star reviews from real Simply Reglaze customers across California. Read all reviews.
“The reglazing process was so much less disruptive than I expected. No demolition, no plumbing, just a beautiful new tub.”
Brian K.
Verified customer
“We had rust stains and discoloration that I thought were permanent. They made it look brand new. Unbelievable!”
Melissa L.
Verified customer
“We had our bathtub done before selling the house and it made a huge difference. Buyers commented on how clean and new it looked.”
Emily M.
Verified customer
Reglazing near Norco
Norco is one of the Inland Empire communities we visit most weeks. Searching for “bathtub refinishing near me” from Norco? You’ve found it — we dispatch from the Los Angeles area and schedule Riverside County jobs within days.
Norco reglazing questions
A typical Norco bathtub is $350–$500 depending on size, material, damage and whether you want a color change. Other surfaces are priced from a photo — free and no obligation.
Yes, all of it — Norco Hills, the River Road area, Downtown and the Hamner corridor. Norco sits right off the 15 and 91, so it is an easy run for our Los Angeles-area technicians.
A single tub or shower usually takes a few hours on site. The new finish then cures overnight, so plan on using the bathroom again the next day.
With proper care, a professionally reglazed surface lasts 5–10 years, and every job is backed by our written warranty.
Yes — repair is the first step of every job. Chips, rust spots and cracks are filled and sanded flush, and a cracked or flexing fiberglass floor can get a permanent inlay before the new finish goes on.
From quote to like-new in three easy steps
Send your details
Fill out the quick form above — or text a photo of your tub, sink or tile to 1 (855) 450-5335 for an even faster quote.
Get your quote
We reply with a no-obligation estimate — usually within minutes during business hours. No pressure, no spam, no surprises.
Book your day
We schedule a visit to your Norco address, do the repair and refinish in a few hours and hand you a written warranty on the way out.
We Make It
Effortless
Tell us what is wrong with the tub, sink or tile and we will tell you what it costs to make it right — one call or text is all it takes.
Recent transformations — see more in our gallery.
The Fastest Quote? Text Us a Photo.
Snap a picture of your tub, sink or tile from a few feet back and text it to 1 (855) 450-5335 — we usually reply within minutes.
Snap it. Text it. Get your quote.